---
title: "Considerations"
slug: "considerations-3"
tags: ["Product Usage", "vIPS 10.1.10"]
updated: 2026-09-03T17:38:16Z
published: 2026-09-11T20:35:37Z
canonical: "docs.trellix.com/considerations-3"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Considerations
Review this section and its sub-sections before deploying the vIPS solution.
## Trellix IPS Manager server instance requirements
| Cloud environment | Resource | Recommended |
| --- | --- | --- |
| **AWS** | Instance type | m4.xlarge or c4.xlarge |
| Disk space | 150 GB |
| **Azure** | Instance type | D2s_v4 |
| Disk space | 150 GB |
## External Controller instance requirements
| Cloud environment | Resource | Recommended |
| --- | --- | --- |
| **AWS** | Instance type | c4.large |
| Disk space | 20 GB |
| **Azure** | Instance type | F4s_v2 |
| Disk space | 20 GB |
> [!NOTE]
> Note
>
> In the event of a large deployment with more than 200 vIPS Probes, Trellix recommends you to deploy an External Controller.
## Trellix IPS Sensor instance requirements
| Cloud environment | Resource | Recommended |
| --- | --- | --- |
| **AWS** | Instance type | c4.xlarge or c5.xlarge |
| Disk space | 40 GB |
| **Azure** | Instance type | F4s_v2 |
| Disk space | 40 GB |
## Trellix vIPS Probe Operating System compatibility
| Operating System | Minimum OS version required (AWS) | Minimum OS version required (Azure) |
| --- | --- | --- |
| Linux | Any of the following: - 64-bit Red Hat Linux 7 and 8 - 64-bit CentOS Linux 7 and 8 - 64-bit SUSE Linux Enterprise Server (SLES) 12 and 15 - 64-bit OpenSUSE Tumbleweed - 64-bit Ubuntu Linux 16.04, 18.04, and 20.04 - 64-bit Amazon Linux 2 - 64-bit Debian 9 and 10 - 64-bit Oracle Linux 7.9 > [!NOTE] > Note > > Only x86 architectures are supported. | Any of the following: - 64-bit Red Hat Linux 8 - 64-bit CentOS Linux 8 - 64-bit SUSE Linux Enterprise Server (SLES) 12 and 15 - 64-bit Ubuntu Linux 16.04, 18.04, and 20.04 - 64-bit Debian 9 and 10 - 64-bit Oracle Linux 7.9 > [!NOTE] > Note > > Only x86 architectures are supported. |
| Windows | - Windows Server 2019 R2 Standard Edition (Server with a GUI) English operating system - Windows Server 2019 Datacenter Edition (Server with a GUI) English operating system - Windows Server 2016 Standard Edition (Server with a GUI) English operating system - Windows Server 2016 Datacenter Edition (Server with a GUI) English operating system - Windows Server 2012 R2 Standard Edition (Server with a GUI) English operating system | - Windows Server 2019 Datacenter Edition (Server with a GUI) English operating system - Windows Server 2016 Datacenter Edition (Server with a GUI) English operating system - Windows Server 2012 R2 Datacenter Edition (Server with a GUI) English operating system |
## Trellix vIPS Probe Operating System for inbound SSL decryption support
The following are the operating systems that are supported for inbound SSL decryption known-key method:
- 64-bit Red Hat Enterprise Linux 7
- 64-bit CentOS 7
- 64-bit SUSE Linux Enterprise Server 12 and 15
- 64-bit Ubuntu Server 16.04 LTS
- Amazon Linux 2
- Oracle Linux 7.4, 7.5, 7.6, 7.7, and 7.8
- Debian 9
- Windows Server 2019 R2 (Server with a GUI) English operating system
- Windows Server 2016 Datacenter Edition (Server with a GUI) English operating system
- Windows Server 2012 R2 (Server with a GUI) English operating system
- Windows 10 English operating system
For Windows operating system with OpenSSL version 1.1.1, complete the steps below to enable inbound SSL decryption:
1. Go to the folder where Apache is installed and execute the
openssl version -v command to verify the OpenSSL version.
2. If the OpenSSL version is 1.1.1 and above, perform the steps as given below:
> [!NOTE]
> Note
>
> You do not have to restart the system after you make changes to the DisableClientExtendedMasterSecret registry settings.
1. On your Windows machine, click
**Start** → **Run**.
2. Type
regedit in the
**Open** textbox. Click
**OK**.
3. Locate and then click the following subkey in the registry:
HKLM\System\CurrentControlSet\Control\SecurityProviders\Schannel
4. Go to
**Edit** → **New** → **DWORD**.
5. Enter
DisableServerExtendedMasterSecret: REG_DWORD as the name of the DWORD for the machine receiving the request. Click
**Enter**.
6. Enter
DisableClientExtendedMasterSecret as the name of the DWORD for the machine initiating the request. Click
**Enter**.
7. Right-click the DWORD entry, and then click
**Modify**.
8. Type any non-zero value like 1 in the
**Value** data box to disable the TLS extension.
## Trellix IPS Manager client requirements
The following table lists the 10.1 Manager/Central Manager client requirements when using Windows 10:
| | Minimum | Recommended |
| --- | --- | --- |
| Operating system | Windows 10, English or Japanese > [!NOTE] > Note > > The display language of the Manager client must be same as that of the Manager server operating system. | Windows 10, version 1903 English or Japanese |
| Memory | 8 GB | 16 GB |
| CPU | 1.5 GHz processor | 2.4 GHz or faster |
| Monitor | 32-bit color, 1440 x 900 display setting | 1920 x 1080 (or above) |
| Browser | - Microsoft Edge - Mozilla Firefox - Google Chrome > [!NOTE] > Note > > To avoid the certificate mismatch error and security warning, add the Manager web certificate to the trusted certificate list. > [!NOTE] > Note > > Internet Explorer 11 is not supported. | - Microsoft Edge 42.0 or later - Mozilla Firefox 70.0 or later - Google Chrome 76.0 or later |
> [!NOTE]
> Note
>
> If you wish to install packet capture tool in your Client machines, Trellix recommends you to stop the vIPS Probe and then install the tool.