Review this section carefully before you configure the Sensor to inspect traffic between VMs.
Note
NS-series Sensors do not support this feature.
Considerations
- The only vendors supported are Reflex and VMWare.
- The operating mode for the Sensor port must be set to SPAN.
- The Manager supports one vendor per Sensor interface. However, you can configure multiple details of the same vendor per interface. For example, you can configure the details of multiple vCenter/vShield per interface. The Manager dynamically determines which one to contact for a particular alert based on the VLAN detected on the packets and the VLAN configured for vCenter/vShield.
- For the Sensor to receive VM traffic from a data center, you need to configure port mirroring on the vSphere Distributed Switch. This enables a single SPAN port of the Sensor to receive traffic from VMs hosted on multiple ESX servers.
- VMware ESXi 5.0
- VMware vSphere 5.0 or later with vSphere Distributed Switch
- An M-series Sensor monitoring port deployed as a dedicated SPAN port.
If you plan to use VMware applications for detecting and quarantining VMs, you will need:
- vCenter 5.0 or later
- vShield 5.0 or later with vShield App
If you plan to use Reflex applications for detecting and quarantining VMs, you will need Reflex VMC version 2.12 build 97272 or later with vTrust.