--- title: "Convert classic Firewall policies to advanced" slug: "convert-classic-firewall-policies-to-advanced" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/convert-classic-firewall-policies-to-advanced" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Convert classic Firewall policies to advanced You can convert a classic Firewall policy to advanced. However, you cannot convert an advanced to classic. > [!NOTE] > Note > > Only Virtual IPS Sensors and M-series Sensors can enforce advanced Firewall policies. ## Task 1. Click the **Policy** tab. 2. From the **Domain** drop-down list, select the domain you want to work in. 3. Select **Intrusion Prevention** → **Policy Types** → **Firewall**. 4. Double-click the required classic Firewall policy. Make sure the **Editable here** column displayed as **Yes** for the policy. If not, go to the domain which owns the policy to convert it. 5. On the **Properties** tab, select **Advanced** from the **Type** drop-down. 6. Click the **Access Rules** tab to view the corresponding rules. The additional parameters applicable only to advanced Firewall policies are now available for these rules. 7. For each access rule, review and specify the required criteria. 8. Do a configuration update to the corresponding Sensors for the changes to take effect.