--- title: "Create a Manager instance using the OVA file" slug: "create-a-manager-instance-using-the-ova-file-1" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/create-a-manager-instance-using-the-ova-file-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a Manager instance using the OVA file > [!WARNING] > Important > > **You cannot perform a direct upgrade from 11.1 Update 9 (MLOS) to 11.1 Update 10 (Trellix OS) using the `upgrade` command**. To install the 11.1 Update 10 version of the Trellix OS Manager on a VM, you must perform a fresh deployment and restore the `All Table Backup`. **Prerequisites:** - You should have a Virtual network defined in the ESXi server for management access. - Make sure you have more than 500 GB disk space available in your ESXi server, as the Linux-based Central Manager/Manager requires 500 GB disk space. **Steps:** 1. Log on to the **VMware ESXi** server. Select **Host** menu from the **Navigator** pane. The **Host** page is displayed. 2. Select **Create/Register VM** option. The **New virtual machine** dialog box is displayed. 3. Select **Deploy a virtual machine from an OVF or OVA file** option and select **Next**. The **Select OVF and VMDK files** section is displayed. 4. In the **Enter a name for the virtual machine** field, provide the name of the virtual machine. > [!NOTE] > Note > > The name can contain up to 80 characters, including letters, numbers, and special characters. Select **Click to select files or drag/drop** option and navigate to location where the file is placed. Then, select the required Manager OVA file and click **Next** option. > [!NOTE] > Note > > The Manager and Central Manager uses different OVA file, you can download the required OVA file from the [Download Server](https://www.trellix.com/en-us/downloads/my-products.html). The **Select storage** section is displayed. 5. Configure the required storage type and datastore for the virtual machine and click **Next** option. The **Deployment options** section is displayed. 6. In the **Deployment options** section, the following options are displayed: | **Network mappings** | From the **Network mappings** drop-down, select clientnetwork as **VM Network**. | | --- | --- | | **Disk provisioning** | Choose the **Disk provisioning** as **Thin** or **Thick** depending on the availability of physical disk storage. It is recommended to use the default provision as **Thin**. | | **Power on automatically** | Enable the **Power on automatically** option. | After configuring the deployment options, click **Next** option. The **Ready to Complete** section is displayed. 7. Verify the configuration and click **Finish** to deploy the Linux-based Manager. 8. Once the deployment is complete, you can configure the Linux-based Manager using SSH.