--- title: "Create a standard vSwitch for the management port" slug: "create-a-standard-vswitch-for-the-management-port-2" tags: ["Product Usage", "vIPS 11.1x", "vIPS"] updated: 2026-09-11T20:53:15Z published: 2026-09-11T20:53:15Z canonical: "docs.trellix.com/create-a-standard-vswitch-for-the-management-port-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a standard vSwitch for the management port ****Prerequisite:**** To create a vSwitch, you might be required to connect an additional physical NIC on the ESX. After you install the Virtual Sensor, you need a standard vSwitch to which you will connect the management port of the Virtual Sensor. If you have installed the Manager on the same ESX, you can connect it to this switch as well. When you create a standard vSwitch, ESX creates a default port group for this vSwitch. ****Steps:**** 1. Connect an additional physical NIC on the ESX to the adjacent physical switch. This is required for the vSwitch that you are creating. 2. Log on to the ESX as the root user in VMware vSphere Web Client. ![GUID-ED003931-0EA0-43A9-889D-8C1D10FE78FE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7fe259e0-dd98-7564-b844-350f5453a32c.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 3. Select the required ESX server and select **Configure** → **Networking** → **Virtual switches**. 4. Click the **ADD NETWORKING** tab. ![GUID-EFF4167D-2437-4338-AD0F-88BB19DB084F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fc7a0cca-1651-8a91-4779-eb00ef554ac0.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 5. For **Select connection type,** select **Physical Network Adapter** (as an example) and click **NEXT**. Selecting the connection type depends on your network design and requirements. For example, if the Manager is installed on a physical machine, you must select **Physical Network Adapter** in such a scenario. Otherwise, the Sensor and the Manager will not be able to communicate. If the Manager is installed on a virtual machine and you plan to use the same vSwitch for both the Sensor management port and the Manager, you might choose **Virtual Machine Port Group for a Standard Switch**. For the scenarios explained in this document, select **Physical Network Adapter**. ![GUID-840503A4-B44F-4C43-82DD-07BBF51760CC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-47cb1729-69f1-772a-e793-45c234736826.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 6. In the **Select target device** section, select **New standard switch**, set the value of **MTU (Bytes)** to `1500` (default value), and then click **NEXT**. ![GUID-6D547674-1AA5-40D0-9BA5-79BDFDD56ABB-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b1a251dc-ff8d-1c27-8ba0-793c236ed50c.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 7. Click **NEXT** to proceed to the next step. 8. In the **Create a Standard Switch** section, click the **Add adapters** (**+**) icon. ![GUID-5203E505-F148-484F-8D6F-639203DFD455-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f1e6c1a4-3d1d-7bda-90b8-268196f0c14b.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 9. In the **Add Physical Adapters to the Switch** window, select the required network adapter and click **OK**. Make sure that a physical NIC corresponding to the network adapter you selected is connected to the network. ![GUID-A20B93EA-C4F5-490D-8359-CBDF6C022EF6-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-df1a784b-310a-91ff-e82c-130a8fe45179.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 10. Verify the properties of the selected adapter and click **NEXT** and then, click **FINISH**. The vSwitch that you created is listed in the **Virtual switches** section. ![GUID-D59450D4-D956-4954-80DF-0EA87E14D990-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2f3441c6-46dd-87a9-8d2c-17e517db9648.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 11. Add the required switch port groups for the vSwitch that you created. To add, expand the specific vSwitch node and click the **ADD NETWORKING** tab. ![GUID-A795BBD9-6E99-450E-913D-21E068F11D49-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d0cbee9a-52ff-1ffc-3e0d-dac4763c06da.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 12. In the **Select connection type** section, select **Virtual Machine Port Group for a Standard Switch** and then click **NEXT**. ![GUID-A4513C6A-2FDD-4B4C-974C-16ACCEC84857-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2eeb6e26-aeea-1b54-1e2d-0853263dc907.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 13. In the **Select target device** section, click on **Select an existing standard switch** and make sure the vSwitch that you created is selected. Then, click **NEXT**. ![GUID-915A769D-9E5F-4373-A7C4-BD45939817E5-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-45c35948-7260-14e0-bb04-6643a5c1e9ea.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 14. In the **Network Label** field, enter the required name for the default port group that the wizard creates for the switch. You can modify **Network Label** later. For easier management, you can name it as *Management Port Group*. 15. Optionally, in **VLAN ID** field, select **All (4095)** and click **NEXT**. If required, you can specify the required VLAN ID as per your network configuration. ![GUID-F8903C2E-6EDC-43A6-ACDC-5FF00EB40AFE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7fdbdd4f-e480-5a46-4dc1-186afdf7d2ba.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 16. Review the details displayed in the **Ready to complete** section and click **FINISH**. This vSwitch is now listed with the switch port group that you created. ![GUID-C0509427-7FD0-4472-B87D-1DED1C1AA7A8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-73ef1a51-80f7-caa0-5f87-17805137ee19.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) 17. Navigate to **Configure** → **Networking** → **Physical adapters** and verify if **Configured Speed** of the assigned physical adapter is set to **Auto negotiate**. ![GUID-A566D0A4-F630-42D8-ACE7-3098009A2615-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7cae1fa3-b071-965d-beef-1ec688c9242e.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A15Z&se=2026-11-20T09%3A36%3A15Z&sr=c&sp=r&sig=9i2Ac4fjDG5kDYnlelV%2B0pI5%2FbISaZ2hf9SUkJLL5Ek%3D) For other property values, you can leave them with the default values.