--- title: "Create a target group for GWLB" slug: "create-a-target-group-for-gwlb" tags: ["Product Usage", "vIPS 11.1x", "vIPS"] updated: 2026-09-11T20:53:15Z published: 2026-09-11T20:53:15Z canonical: "docs.trellix.com/create-a-target-group-for-gwlb" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a target group for GWLB To create a target group, perform the following steps: 1. Login to the AWS console, and navigate to **Services** → **Compute** → **EC2**. 2. In the left panel, under **Load Balancing**, click **Target Groups**. The **Target Groups** page is displayed. 3. In the **Target Groups** page, select **Create target group**. Target Groups![Target Groups](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8dd02f8b-465e-494b-27ac-27c2d81a6c07.jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A51Z&se=2026-11-20T14%3A56%3A51Z&sr=c&sp=r&sig=q%2FPdnkE0ajsRLqQtrRJBQX5dO1pMotywP71%2FSu34JRo%3D) The **Specify group details** page is displayed. 4. Go to **Basic configuration**, select **Instances** from **Choose a target type**. 5. Provide the name of the Target group in **Target group name** field. 6. Select **GENEVE** from the Protocol drop-down. 7. Select the VPC with the instances that you want to include in the target group from the **VPC** drop-down. Specify group details![Specify group details](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-828d8e82-e8dc-49d5-2969-cf6d731fbcd8.jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A51Z&se=2026-11-20T14%3A56%3A51Z&sr=c&sp=r&sig=q%2FPdnkE0ajsRLqQtrRJBQX5dO1pMotywP71%2FSu34JRo%3D) 8. Go to **Health checks**, and select TCP from the **Health check protocol** drop-down. 9. Go to **Advanced health check settings**, choose **Override** from **Health check port**, and provide the value as **9001**. Based on your requirements, you can configure **Healthy threshold**, **Unhealthy threshold**, and other parameters. Later, click **Next**. > [!NOTE] > Note > > Trellix recommends using the ****Healthy threshold**** value between ****2-10**** and the ****Unhealthy threshold**** value between ****2-10**** for any Sensor. For auto-scaling Sensors, a ****Healthcheck Grace Period**** value can be between ****300-600****. Health checks![Health checks](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f417aa29-4eca-fd2e-dfad-9845f9b44d5e.jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A51Z&se=2026-11-20T14%3A56%3A51Z&sr=c&sp=r&sig=q%2FPdnkE0ajsRLqQtrRJBQX5dO1pMotywP71%2FSu34JRo%3D) The **Register targets** page is displayed. 10. Select the required instances from the **Available instances** list. Click **Include as pending below**. The required Sensors will be displayed in the **Target** window. > [!NOTE] > Note > > You can specify the instances, or leave the group empty if you prefer to add targets later. Available instances![Available instances](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-4d274e00-2812-4119-61d7-9d22054d91e4.jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A51Z&se=2026-11-20T14%3A56%3A51Z&sr=c&sp=r&sig=q%2FPdnkE0ajsRLqQtrRJBQX5dO1pMotywP71%2FSu34JRo%3D) 11. You can review the list of Sensors in **Review targets**. After reviewing the list, click **Create target group** to complete the process. Review targets![Review targets](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-224bbf79-6250-3daa-20be-41c1e89b6dca.jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A51Z&se=2026-11-20T14%3A56%3A51Z&sr=c&sp=r&sig=q%2FPdnkE0ajsRLqQtrRJBQX5dO1pMotywP71%2FSu34JRo%3D) > [!NOTE] > Note > > - For configuring the routing tables, you can refer to [VPC Routing Enhancements and GWLB Deployment Patterns](https://aws.amazon.com/blogs/networking-and-content-delivery/vpc-routing-enhancements-and-gwlb-deployment-patterns/) in AWS documentation. > - Before configuring the routing table, check if the Sensor is in good health. Otherwise, the Sensor will fail to direct traffic.