--- title: "Create an attack set profile" slug: "create-an-attack-set-profile-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:11Z published: 2026-11-19T12:28:11Z canonical: "docs.trellix.com/create-an-attack-set-profile-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create an attack set profile Sensors support both normal blocking and SmartBlocking. SmartBlocking is the blocking of attacks based on the Benign Trigger Probability (BTP) value of the attack signatures which trigger the attack. Trellix recommends certain attacks for SmartBlocking, and these are referred to as Recommended for SmartBlocking (RFSB) attacks. While creating an attack set profile, you can enable SmartBlocking for those exploit, recon, or policy violation attacks for which Trellix has recommended SmartBlocking. You can also create rules to choose attacks to be explicitly blocked by the Sensor as per your network requirements while creating an attack set profile. The configuration options on the **Attacks to Block** tab enables you to select minimum severity, categories, and subcategories of attacks which should be explicitly blocked by the Sensors. It works on the subset of data that comes in the form of **Include** rule(s) set on the **Attacks to Include/Exclude** tab. In other words, rules created on the **Attacks to Block** tab determine the attack definitions that are automatically set to be blocked in the corresponding IPS policy. For more formation, refer to the section [Defining and using user-customizable blocking strategy to make self-adaptable IPS policies](/network-and-platform/docs/defining-and-using-user-customizable-blocking-strategy-to-make-self-adaptable-ip). 1. In the Manager, click **Policy** and select the required **Domain**. 2. Select **Intrusion Prevention** → **Objects** → **Attack Set Profiles.** The **Attack Set Profiles** page is displayed. **Attack Set Profiles page**![Attack Set Profiles page](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e99073ba-6325-6a41-7a23-04305a4baf3a(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) 3. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D). The new page with **Properties** tab is displayed. **Properties tab**![Properties tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d949fa47-773d-df0f-5a0b-066a7d72ab93(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) The following fields are displayed on the **Properties** tab: | Option | Definition | | --- | --- | | **Name** | Type the name of the attack set profile being created. The name should contain only letters, numbers, spaces, commas, hyphens and underscores. > [!NOTE] > Note > > The name field should not be left blank and no special character should be entered while typing the name. | | **Description** | Type the description of the attack set profile. | | **Owner** | Displays the domain to which the IPS Policy belongs | | **Editable here** | Indicates whether you can edit or delete the selected attack set profile from the current admin domain | | **Default Blocking Behavior for Recommended for SmartBlocking (RfSB) Attacks** | To enable SmartBlocking, select the options from the drop-down list of the following categories: **RfSB Exploits** **RfSB Malware Detections** **RfSB Reconnaissance Attacks** **RfSB Policy Violations** The available options for the above mentioned categories are **Blocking disabled** and **Enable SmartBlocking**. | 4. Click **Next** to save the changes made on the **Properties** tab and go to the next tab. The **Attacks to Include/Exclude** tab is displayed. **Attacks to Include/Exclude tab**![Attacks to Include/Exclude tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1489ff3e-73fa-799b-061d-0faa5fa711df(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) 5. On the **Attacks to Include/Exclude** tab, click the appropriate button to insert a new rule. You can insert a new rule by clicking either ![GUID-002605CA-A671-41C2-AC91-CCE74A6CB27E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d3045ce-12f2-7972-e28b-71bc39197745(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) or ![GUID-01632DAF-E14F-4696-93EF-18654509F3B8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2457ff78-7e7b-d691-f55e-517ce8f112ed(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) icon. The **Details** panel is displayed. **Details panel on Attacks to Include/Exclude tab**![Details panel on Attacks to Include/Exclude tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fc67c853-6b02-2949-af1d-4e4ee311f0c5(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) 6. In the **Details** panel, select the appropriate options. | Option | Definition | | --- | --- | | **Action** | Select the action as **Include** or **Exclude**. | | **Comment** | Enter additional comments, if any. | | **Match Specific Attacks Only** | Select the checkbox if you want to mark the rule for a specific attack. | | **Minimum Severity** | Select the minimum severity level from the drop-down list. The following are the available options: - **None** - **Informational (0)** - **Low (1)** - **Low (2)** - **Low (3)** - **Medium (4)** - **Medium (5)** - **Medium (6)** - **High (7)** - **High (8)** - **High (9)** | | **Maximum Benign Trigger Probability (BTP)** | Specify the maximum probability of the search for this attack that will return a false positive. The following are the available options: - **None (0)** - **Low (1)** - **Low (2)** - **Medium (3)** - **Medium (4)** - **Medium (5)** - **High (6)** - **High (7)** | | **Attack Type** | From the drop-down list, select the attack type as **Any** or **RfSB only** | | **Attack Category** | 1. Select the attack category from the drop-down-list. The attack categories are: - **Exploit** - **Malware** - **Policy Violation** - **Reconnaissance** 2. Click the **Add** button to add the attack category to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the item from the list. | | **Application** | 1. Select the applications from the drop-down-list. 2. Click the **Add** button to add the applications to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the application from the list. | | **Protocol** | 1. Select the protocol from the drop-down-list. 2. Click the **Add** button to add the protocol to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the protocol from the list. | | **Operating System** | 1. Select the operating system from the drop-down-list. 2. Click the **Add** button to add the operating system to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the operating system from the list. | | **Specific Attacks** | This section is displayed only if you select the **Match Specific Attacks Only** option. 1. Type and search for a specific attack by typing the first few letters of the attack in the text field. The list of attacks matching with the letters are displayed. 2. Select the required attack from the drop-down list. 3. Click on the **Add** button to add the attack to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the attack from the list. | 7. Click **OK** to confirm the configuration changes. 8. Repeat the relevant steps to add more rules to the attack set profile being created. Click **Next** to save the changes made on the **Attacks to Include/Exclude** tab and go to the next tab. The **Attacks to Block** tab is displayed. **Attacks to Block tab**![Attacks to Block tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7eea2075-fb91-b8a5-d53a-a510fbc11f5f(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) 9. On the **Attacks to Block** tab, click the appropriate button to insert a new rule. You can insert a new rule by clicking either ![GUID-002605CA-A671-41C2-AC91-CCE74A6CB27E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d3045ce-12f2-7972-e28b-71bc39197745(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) or ![GUID-01632DAF-E14F-4696-93EF-18654509F3B8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2457ff78-7e7b-d691-f55e-517ce8f112ed(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) icons. The **Details** panel is displayed. **Details panel on Attacks to Block tab**![Details panel on Attacks to Block tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c18c9938-5025-4d42-0e66-c4ffad7fb1ca(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) > [!NOTE] > Note > > You can create rule for blocking in custom attack set profiles only, as the default or preconfigured attack set profiles are read-only. 10. In the **Details** panel, select the appropriate options. | Option | Definition | | --- | --- | | **Minimum Severity** | Select the minimum severity level from the drop-down list. The following are the available options: - **Medium (4)** - **Medium (5)** - **Medium (6)** - **High (7)** - **High (8)** - **High (9)** > [!NOTE] > Note > > The default value selected while creating a rule is **High (9)**. > [!WARNING] > Important > > **Informational** and **Low** severity attacks cannot be set for automatic blocking. | | **Comment** | Enter additional comments, if any. | | **Attack Category** | Select one or more attack categories as per your requirement from the drop-down-list. The attack categories available are the following: - **Exploit** - **Malware** - **Policy Violation** - **Reconnaissance** Click the **Add** button to add the attack category to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the item from the list. | | **Attack Subcategory** | Select one or more attack subcategories for the attack category selected. Click the **Add** button to add any subcategory to the list. Click ![GUID-377572A5-33EB-43F9-A828-202101E436DC-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-50797124-41b6-e061-4ecf-99962aaf2ea3(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) to remove the item from the list. > [!WARNING] > Important > > - Attack subcategories are available only when you add an attack category. > - You cannot select any attack subcategory if you have added two or more attack categories in a single rule. For example, if you want to block exploits and malware of severity 8 and backdoors and botnets of severity level 9, you need to create two separate rules - one with minimum severity level chosen as **High (8)**, **Attack Category** selected as **Exploit** and **Attack Subcategory** selected as **Backdoor**, and another with minimum severity level chosen as **High (8)**, **Attack Category** selected as **Malware** and **Attack Subcategory** selected as **Botnet**. | 11. Click **OK** to confirm the configuration changes. On the **Attacks to Include/Exclude** and **Attacks to Block** tabs, you can perform the following actions: | Option | Definition | | --- | --- | | ![GUID-002605CA-A671-41C2-AC91-CCE74A6CB27E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d3045ce-12f2-7972-e28b-71bc39197745(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Inserts a new rule above the currently selected rule | | ![GUID-01632DAF-E14F-4696-93EF-18654509F3B8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2457ff78-7e7b-d691-f55e-517ce8f112ed(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Inserts a new rule below the currently selected rule | | ![GUID-4EEC0D44-C0FE-467B-B1DB-948A06C873A3-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ffe1c8d2-eb80-8bcc-77e2-6f3d628ca894(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Clones the currently selected rule | | ![GUID-D55902DD-BC7E-4406-B464-AA20BE7D2793-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e4287c60-380f-82f7-8f9d-42d3eb102440(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Deletes the currently selected rule | | ![GUID-F14FF892-015E-498D-9F2E-D89D5BE11D9A-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-918f0bad-ff40-a875-a822-b25057273cb0(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Moves the currently selected rule one row up | | ![GUID-A171DF4D-79F1-49C1-A8AB-E834EFB1DBAA-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-557f729f-1b8c-f718-6a16-5a9ba0b17eff(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A19Z&se=2026-11-20T11%3A34%3A19Z&sr=c&sp=r&sig=%2BWBr9vSHV%2FYwt8radBUJa1Q0lDRCTXXdj6%2Biwl2wbWo%3D) | Moves the currently selected rule one row down | > [!NOTE] > Note > > Rules are cumulative on the **Attacks to Include/Exclude** and **Attacks to Block** tabs and the option to make changes in the rule order is solely to optimize viewing. 12. Click **Save** to save the Attack set profile configuration. Your new attack set profile is listed in the **Attack set Profiles** page.