--- title: "Create and assign firewall policies" slug: "create-and-assign-firewall-policies-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:47Z published: 2026-11-19T12:28:47Z canonical: "docs.trellix.com/create-and-assign-firewall-policies-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create and assign firewall policies A firewall policy or access control list (ACL) is used to control host access by specifying attacker and target. You can create and assign advanced firewall policies using the **Ignore Rules** page. 1. Select **Analysis** → **** → **Attack Log**. The **Attack Log** page opens. 2. Select an alert to which you want to assign an ignore rule object and click **Other Actions** → **Create Exceptions** → **Add Ignore Rule**. The **Add Ignore Rule** window opens. > [!TIP] > Tip > > The **Attack**, **Attacker**, **Target** and **Owner Domain** are pre-populated with information about the alert. 3. Enter a **Name** for the ignore rule and comment if required. 4. Select a **Secondary Action** for the alert. You can choose to acknowledge all alerts that match the rule or delete them. 5. For an ACL remove the attack. You can remove the attack by clicking the **X** icon. 6. Select the interface to which the rule has to be applied from the **Resource** drop-down list and click **Add**. The scope of the ignore rule can be restricted to an interface or a device, or applicable to the admin domain as a whole. 7. Select or enter the **Attacker** IP address from **Endpoint**. You can add multiple **Attacker** IP addresses. You can also create a new rule object for the attacker by clicking the *add* icon. Click the *edit* icon to edit the selected IP address. 8. Select the **Port** for the attacker IP address. If you selected the port as **TCP**, **UDP**, or **TCP or UDP**, enter the port number. 9. Select the **Target** IP address from **Endpoint** and the **Port** for the IP address. 10. Click **Save** to save the ignore rule. You can view the added ignore rule under **Policy** → **** → **Intrusion Prevention** → **Exceptions** → **Ignore Rules**.