--- title: "Create and assign ignore rule objects" slug: "create-and-assign-ignore-rule-objects-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:47Z published: 2026-11-19T12:28:47Z canonical: "docs.trellix.com/create-and-assign-ignore-rule-objects-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create and assign ignore rule objects 1. Select **Analysis** → **** → **Attack Log**. The **Attack Log** page opens. 2. Select an alert to which you want to assign an ignore rule object and click **Other Actions** → **Create Exceptions** → **Add Ignore Rule**. The **Add Ignore Rule** window opens. > [!TIP] > Tip > > The **Attack**, **Attacker**, **Target** and **Owner Domain** are pre-populated with information about the alert. 3. Enter a **Name** for the ignore rule and comment if required. 4. Select a **Secondary Action** for the alert. You can choose to acknowledge all alerts that match the rule or delete them. 5. You can add multiple attacks in the **Attack** section and select the **Direction** for the attacks. If you want to assign the ignore rule to traffic leaving the network, select **Outbound**. If you want to assign the ignore rule to traffic entering the network, select **Inbound**. However, should you choose to assign the ignore rule to traffic in both directions, select **Any**. > [!TIP] > Tip > > You can enter the attack name to search the attack or select it from the **Attack** drop-down list and click **Add**. 6. Select the interface to which the rule has to be applied from the **Resource** drop-down list and click **Add**. The scope of the ignore rule can be restricted to an interface or a device, or applicable to the admin domain as a whole. 7. Select or enter the **Attacker** IP address from **Endpoint**. You can add multiple **Attacker** IP addresses. You can also create a new rule object for the attacker by clicking the *add* icon. Click the *edit* icon to edit the selected IP address. 8. Select the **Port** for the attacker IP address. If you selected the port as **TCP**, **UDP**, or **TCP or UDP**, enter the port number. 9. Select the **Target** IP address from **Endpoint** and the **Port** for the IP address. 10. Click **Save** to save the ignore rule. You can view the added ignore rule under **Policy** → **** → **Intrusion Prevention** → **Exceptions** → **Ignore Rules**.