--- title: "Create and assign policy to managed systems" slug: "create-and-assign-policy-to-managed-systems" tags: ["Integration", "IPS 10.1.10"] updated: 2026-09-21T08:19:33Z published: 2026-09-21T08:19:33Z canonical: "docs.trellix.com/create-and-assign-policy-to-managed-systems" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create and assign policy to managed systems For McAfee EIA to communicate with the NTBA Appliance, policy must be applied to managed systems. ## Task 1. From the ePolicy Orchestrator - On-prem console, select **Policy Catalog**: 1. Select **Product** as *Endpoint Intelligence Agent .* 2. Select **Category** as **EIA Settings**. 2. Click the **My Default** policy to edit it. 1. Select the **Device Type** as **NTBA** from the drop-down list. 2. Enter the source IP address. 3. Enter the subnet mask. 4. Enter the device IP address. The device IP address you specify here must be the same as the NTBA Management IP address running on your Manager. 5. Enter the port number. Select the NTBA listening port for McAfee EIA connections and make sure that this port is not blocked by Firewall rules. Default port used on NTBA is 9008. 6. Click **Add Route** and click **Save**. 3. On the **System Tree** tab, click **Actions** → **Agent** → **Wake Up Agents** for the new configurations to take effect. By default, the policy is applied to all groups/subgroups. For more information, see the Endpoint Intelligence Agent Product Guide.