--- title: "Create the signature" slug: "create-the-signature-1" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/create-the-signature-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create the signature After you create the attack definition, you create the signature for the attack. **Steps:** 1. Click **Signature-** tab. 2. (Optional) Clear the **Name** and type a new name for your signature. 3. For this example, you can leave the **Benign Trigger Probability (BTP)** and **Target Host Architecture** with the default values. 4. This example is to search for a string in the HTTP URI. So, select **Request Packets** as the **Detection Window**. 5. Based on the Sensor model that you plan to use for this example, select the **Supported Device Types**. **New Signature window**![New Signature window](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-54e8a765-3929-5950-ed51-e2f332ec3a76(8).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A50%3A48Z&se=2026-11-20T14%3A50%3A48Z&sr=c&sp=r&sig=kD2u4ojiQrpgQFevgJwv9HUAvKmmEzA6%2B1zebecg%2F3M%3D) 6. Add the condition to the signature. It is in the conditions that you specify the following details: - The string that the Sensor should look for - Which section of the HTTP request should it look for the string 7. Proceed to add the condition.