--- title: "Create the signature for numeric range match" slug: "create-the-signature-for-numeric-range-match-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/create-the-signature-for-numeric-range-match-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create the signature for numeric range match After you create the attack definition, you create the signature for the attack. **Steps:** 1. In the **New Custom Attack** window, click **Signature-** tab. **New Signature window**![New Signature window](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-423b8c0f-86e2-2969-9d4f-4c1329ee7b3c(7).png?sv=2026-02-06&spr=https&st=2026-11-20T15%3A52%3A57Z&se=2026-11-20T16%3A52%3A57Z&sr=c&sp=r&sig=06ESX3hkDSnyGiyF3hQHiUVbxt3NpKhmOTd%2FPlnrxT4%3D) 2. (Optional) Clear the **Name** and type a new name for your signature. 3. For this example, you can leave the **Benign Trigger Probability (BTP)**, **Target Host Architecture**, and **Detection Window** with the default values. 4. Based on the Sensor model that you plan to use for this example, select the **Supported Device Types**. 5. Add the condition to the signature. It is in the conditions that you specify the following details: - The string that the Sensor should look for. - Which section of the http request should it look for the string. 6. Proceed to add the condition.