--- title: "Create the signature for packet grep protocol match" slug: "create-the-signature-for-packet-grep-protocol-match" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:33:04Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/create-the-signature-for-packet-grep-protocol-match" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create the signature for packet grep protocol match After you create the attack definition, you create the signature for the attack. ## Task 1. In the **New Custom Attack** window, click **Signature-** tab. New Signature window ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-BF0D8930-3EA8-4043-A690-26A02F30ACBC-low.png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A13%3A26Z&se=2026-11-22T18%3A13%3A26Z&sr=c&sp=r&sig=mbauPynptKhIRxAU%2B7Ovs9HS1Dx9RNEsKC0PmGfwGpU%3D) 2. (Optional) Clear the **Name** and type a new name for your signature. 3. For this example, you can leave the **Benign Trigger Probability (BTP)**, **Target Host Architecture**, and **Detection Window** with the default values. 4. Based on the Sensor model that you plan to use for this example, select the **Supported Device Types**. 5. Add the condition to the signature. It is in the conditions that you specify the following details: - The string that the Sensor should look for - Which section of the HTTP request should it look for the string 6. Proceed to add the condition.