--- title: "Create the signature for single fixed field match" slug: "create-the-signature-for-single-fixed-field-match-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/create-the-signature-for-single-fixed-field-match-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create the signature for single fixed field match After you create the attack definition, you create the signature for the attack. **Steps:** 1. In the **New Custom Attack** window, click **Signature-** tab. **New Signature window**![New Signature window](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ce79a675-21e9-b86f-eec1-aeaa5ee9d860(7).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A56%3A50Z&se=2026-11-20T15%3A56%3A50Z&sr=c&sp=r&sig=GWDacDKYu8J0Ncrhyoru23zkouW9Dlsz0ZItEGKptTg%3D) 2. (Optional) Clear the **Name** and type a new name for your signature. 3. For this example, you can leave the **Benign Trigger Probability (BTP)**, **Target Host Architecture**, and **Detection Window** with the default values. 4. Based on the Sensor model that you plan to use for this example, select the **Supported Device Types**. 5. Add the condition to the signature. It is in the conditions that you specify the following details: - The string that the Sensor should look for - Which section of the HTTP request should it look for the string 6. Proceed to add the condition.