--- title: "Create the signature" slug: "create-the-signature" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:33:07Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/create-the-signature" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create the signature After you create the attack definition, you create the signature for the attack. ## Task 1. Click **Signature-** tab. 2. (Optional) Clear the **Name** and type a new name for your signature. 3. For this example, you can leave the **Benign Trigger Probability (BTP)** and **Target Host Architecture** with the default values. 4. This example is to search for a string in the HTTP URI. So, select **Request Packets** as the **Detection Window**. 5. Based on the Sensor model that you plan to use for this example, select the **Supported Device Types**. New Signature window ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-1B270223-4E64-4A81-9D4B-EAB67DCD56A7-low.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A24Z&se=2026-11-20T12%3A16%3A24Z&sr=c&sp=r&sig=oJrEWHr%2F0m9SUSm3vKE3rbuBkPR5U3hFl0DCs9iIDVY%3D) 6. Add the condition to the signature. It is in the conditions that you specify the following details: - The string that the Sensor should look for - Which section of the HTTP request should it look for the string 7. Proceed to add the condition.