--- title: "Creating a custom self-signed Web Server certificate request" slug: "creating-a-custom-self-signed-web-server-certificate-request-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:23:23Z published: 2026-11-17T09:23:23Z canonical: "docs.trellix.com/creating-a-custom-self-signed-web-server-certificate-request-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating a custom self-signed Web Server certificate request You must generate a certificate request and submit it to a certificate authority before uploading a custom self-signed certificate to the NDR. To create a custom self-signed Web server certificate request: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter the Web server certificate configuration menu. `npadmin@ia(config)# certificates` 6. Enter `1`. The custom certificate configuration menu appears. 7. Enter `1` to open the certificate signing request (CSR) settings. You see a menu similar to the following: `Country Name (2 letter code) []:` `State or Province Name (full name) []:` `Locality Name (eg, city) []:` `Organization Name (eg, company) []:` `Organizational Unit Name (eg, section) []:` `Common Name (eg, fully qualified host name) []:` `Email Address []: Key Size []:` 8. Enter the information required of each setting. However, if `Key Size [] is left empty`, the generated private key size defaults to 2048, which meets the security requirements defined by the National Institute of Standards and Technology (NIST). 9. Enter `Y` to confirm the CSR settings are correct. A PEM-encoded request is generated by the system. 10. Copy and paste the PEM-encoded request into a text file and submit the request to a certificate authority.