--- title: "Creating a Network Security HA pair using the CLI" slug: "creating-a-network-security-ha-pair-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-10-01T12:12:52Z published: 2026-10-01T12:12:52Z canonical: "docs.trellix.com/creating-a-network-security-ha-pair-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating a Network Security HA pair using the CLI Use the commands in this section to create a Network Security HA pair. To create a Network Security HA pair: 1. Make sure all requirements listed in [System requirements](/network-and-platform/docs/system-requirements-12) have been met. 2. Log in to the Central Management System CLI. 3. Enable the CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal hostname (config) # ``` 4. Create the pair: ```plaintext hostname (config) # cmc ha nx appliances enable-nx-ipv6 ``` where: `<pair>` is a unique name that identifies the Network Security HA pair. `<member1>` and `<member2>` are the names of the two Network Security appliances that will form the pair. (The appliance names are displayed in the `show cmc appliances` command output). `enable-nx-ipv6` allows the Central Management System appliance to enable IPv6 on the two appliances. 5. (Optional) Add a comment that describes the pair. (See [Working with comments](/network-and-platform/docs/working-with-comments) for details.) 6. Synchronize the configuration so the detection settings are identical. (See [Synchronizing configuration settings using the CLI](/network-and-platform/docs/synchronizing-configuration-settings-using-the-cli).) 7. Verify your changes: ```plaintext hostname (config) # show cmc ha nx ``` 8. Save your changes ```plaintext hostname (config) # write memory ``` ##### Example The following example creates a Network Security HA pair named "Acme_NXHA" that includes the "nx-1 and "nx-2" appliances. ```plaintext hostname (config) # cmc ha nx Acme_NXHA appliances acme-nx1 acme-nx2 enable-nx-ipv6 hostname (config) # cmc ha nx Acme_NXHA comment "Western region NX pair" hostname (config) # show cmc ha nx NX-HA Acme_NXHA nx-1 nx-2        Status: OK        Comment:                            Western region NX pair    Connected:                          yes    Software version match:             yes    Configuration match:                yes    GI image version match:             yes    Security content version match:     yes    NX health status OK:                yes    System time in sync:                yes    Peer id verified:                   yes    Hardware model match:               yes ``` ### Note See [Viewing the Network Security HA status](/network-and-platform/docs/viewing-the-network-security-ha-status) for a description of the output fields.