--- title: "Creating a Network Security HA pair using the web UI" slug: "creating-a-network-security-ha-pair-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:32:10Z published: 2026-09-12T20:32:10Z canonical: "docs.trellix.com/creating-a-network-security-ha-pair-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating a Network Security HA pair using the web UI To create a pair: 1. Make sure all requirements listed in [System requirements](/docs/system-requirements-31) have been met. 2. Log into the Central Management System Web UI. 3. Select **Appliances** > **Sensors**. 4. Select **Actions** > **Create HA Pair**. The **CREATE HA PAIR** dialog shows supported Network Security models that are connected to the Central Management System appliance. ![NXHA_SelectMembers_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a7138ee6-6564-e5bf-b9bc-0b9a854e3505.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A49%3A55Z&se=2026-11-20T08%3A49%3A55Z&sr=c&sp=r&sig=Qq7PCYrigFpp%2BrNdbmpHl1BoG0jx0l4S%2FD8igtFfe1w%3D) 5. Enter a unique name for the Network Security pair. 6. Select the checkboxes for the two Network Security appliances that will form the pair. 7. To configure the HA port-pair for the NX-HA pair being created, select the same port-pair in the dropdown for each appliance. 8. Click **CREATE PAIR**. 9. If you are prompted to enable IPv6 on the appliances, click **OK**. 10. Synchronize the configuration so the detection settings are identical. (See [Synchronizing configuration settings using the Web UI](/docs/synchronizing-configuration-settings-using-the-web-ui).) :