--- title: "Creating access groups for YARA rules using the CLI" slug: "creating-access-groups-for-yara-rules-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/creating-access-groups-for-yara-rules-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating access groups for YARA rules using the CLI Use the commands in this topic to create an access group for YARA rules access. To create an access group: 1. Log in to the Network Security CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Create the access group: ``` hostname (config) # aaa authorization access-groups group [description ""] ``` where: - `access group name` is the name of the access group. - description is optional information about the access group. Enclose the description in double quotation marks if it includes more than one word. 4. Verify your change: ``` hostname (config) # show aaa authorization groups group ``` 5. Save your changes: ``` hostname (config) # write memory ``` ### Example The following example creates the "special-analysts" access group on the Network Security appliance. ``` hostname (config) # aaa authorization access-groups group special-analysts ``` ``` hostname (config) # show aaa authorization access-groups group special-analysts AAA Authorization Access-groups Rules : Enabled ----------------------------------------------------- # Group: special-analysts ``` ``` ----------------------------------------------------- No Rules Configured ``` :