--- title: "Creating IPS custom variables using the Web UI" slug: "creating-ips-custom-variables-using-the-web-ui-3" updated: 2026-08-25T21:18:25Z published: 2026-08-25T21:18:25Z canonical: "docs.trellix.com/creating-ips-custom-variables-using-the-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating IPS custom variables using the Web UI IPS custom variables are used in custom IPS rules, which are uploaded via the Web UI or the API. This feature is supported on the following appliances: - Central Management release 9.1.3 and later. - Network Security release 9.1.3 and later. The IPS policy synchronization capability supports custom variables. IPS custom rules configured with IPS custom variables will synchronize successfully across all the managed appliances. ### Prerequisites - Operator or admin access ###### To create an IPS custom variable using the Web UI: 1. Log in to the Central Management System Web UI. 2. Navigate to the IPS Custom Rules page. 3. Click **Add**. ![IPSCustomRule.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-82eadc26-113b-ae7b-f812-662180747146(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A23%3A45Z&se=2026-11-20T07%3A23%3A45Z&sr=c&sp=r&sig=R10ds4pSDBCbI3pRwDm1rW86VynUBdmLgxQ8FjcFuaM%3D)![IPSCustomRule2.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-4f58751f-cd3c-76b8-9cd8-37b18bd2d47c(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A23%3A45Z&se=2026-11-20T07%3A23%3A45Z&sr=c&sp=r&sig=R10ds4pSDBCbI3pRwDm1rW86VynUBdmLgxQ8FjcFuaM%3D) 4. Enter the **Name** of the variable. A variable name can only have alphanumeric characters, hyphen, and underscore symbols. You can edit a variable even after creating it. 5. Select the **Type** from the dropdown list: **IP Address or Port Address**. The type cannot be modified later. 6. Enter one of the following: - A valid IPv4 or IPv6 address. - A port number between 1 and 65535. To add multiple addresses, enter a list of port numbers or IP addresses separated by commas. Port range can also be specified as 1:46. Use a $ prefix to refer to another variable name. You can assign up to 500 values to a single variable. 7. Click **Save** to save new variable. If you want to delete variables, you can click **Delete** to delete a single variable or click **Delete All** to delete multiple variables. If your appliance is managed by a Central Management appliance, enable the **Write To Group** option in the Central Management Web UI to push the changes to a selected group of appliances managed by the Central Management appliance. :