--- title: "Creating network interfaces" slug: "creating-network-interfaces" tags: ["Install and Get Started", "NDRC 4.x", "Customer", "Network Security"] updated: 2026-09-09T18:08:56Z published: 2026-09-09T18:08:56Z canonical: "docs.trellix.com/creating-network-interfaces" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating network interfaces The ether1 interface on the NDR Console virtual appliance is the only interface that Azure creates by default. Before you create the management interface, you need to create a network security group and security rules to allow you to connect to the NDR Console via SSH and HTTPS. - [Creating a network security group for a network interface](/network-and-platform/docs/creating-network-interfaces#creating-a-network-security-group-for-a-network-interface) - [Creating a network interface](/network-and-platform/docs/creating-network-interfaces#creating-a-network-interface) ### Creating a network security group for a network interface Follow these steps to create a network security group and security rules to allow you to connect to the NDR Console via SSH and HTTPS. **To create a network security group:** 1. Obtain the following information: - Resource group name - Name of the NDR Console virtual machine you want to create 2. Using the Azure CLI, create the network security group and related rules using the following commands: ```plaintext az network nsg create       \  --name \  --resource-group az network nsg rule create \  --name allow_ssh \  --resource-group \  --nsg-name \  --priority 101 \  --protocol Tcp \  --direction Inbound \  --destination-port-ranges 22 az network nsg rule create \  --name allow_web        \  --resource-group \  --nsg-name \                          \  --priority 102 \  --protocol Tcp \  --direction Inbound \  --destination-port-ranges 443 ``` ### Creating a network interface You need the following information: - Resource group name - Location (example: “westus”) - Virtual Network name (example: “virtual-network-name”) - Subnet name - VM name - Name of the network security group you created earlier - The name of the public IP address created earlier **To create an interface:** Using the Azure CLI, create the management network interface using the following command. ```plaintext az network nic create --name \  --public-ip-address \  --vnet-name \  --subnet \  --resource-group ```