--- title: "Creating the Network Security virtual machine using the private products listing in marketplace" slug: "creating-the-network-security-virtual-machine-using-private-products-listing" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-01T09:30:10Z published: 2026-10-01T09:30:10Z canonical: "docs.trellix.com/creating-the-network-security-virtual-machine-using-private-products-listing" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating the Network Security virtual machine using the private products listing in marketplace This topic describes how to create a Network Security virtual machine using the Private Products listing in Marketplace. **Prerequisite**: Ensure the [Azure requirements](/network-and-platform/docs/azure-requirements) are met. To create a Network Security virtual machine: 1. In the Azure portal, navigate to the **Marketplace**. 2. In the left pane, under **My Marketplace**, click **Private products**. 3. Type *Trellix* in the search field and select the Trellix Network Security listing. 4. Click **Create**. 5. Select the tabs at the top of the **Create a virtual machine** page that opens, and configure settings as described in the following sections. ![Azure_create_vm_tabs.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-67355968-9c15-6ff3-85e9-18e354604a59.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A30Z&se=2026-11-20T11%3A16%3A30Z&sr=c&sp=r&sig=FohB%2BItoSKpwfmetFsvp6zYPnVMggHYFMUhJzP9p%2FKs%3D) ### Note Settings that are not required for a Trellix virtual appliance are not covered in these sections. You can accept the default values for the other settings, or specify values that are appropriate for your environment. ### Basics The **Basics** page contains the following sections. ###### Project details - Make sure the correct **Subscription** and **Resource group** are selected. ###### Instance details - Enter a **Virtual machine name**. - Make sure the correct **Region** is selected. - Make sure the correct **Image** is selected. - Select the virtual machine **Size** based on your requirements. The specifications are displayed when you make your selection. ### Note For a list of the sizes supported for a Network Security virtual machine, see [Network Security model and sizes](/network-and-platform/docs/azure-specifications#network_security_model_and_sizes). Administrator account You can use this section to configure an SSH key to authenticate the initial admin user in the appliance CLI. - The **Username** will be ignored during the first CLI login attempt, because the first login user is always "admin." You can create additional admin user accounts later from the appliance Web UI or CLI. - If you enter a **Password**, it cannot be used when you initially log in to the virtual appliance from the Azure console or an SSH session. You must log in to the Azure console using "admin" as the username and "admin" as the password, and then immediately change the password. You can then log in to the virtual appliance CLI in an SSH session, and run the configuration jump-start wizard. You can optionally change the password again in the wizard. You can then configure SSH public keys from the virtual appliance Web UI or CLI. - If you enter an **SSH public key**, you will be unable to log into the Azure console, but you can use the key to log in to the virtual appliance CLI in an SSH session. After you run the configuration jump-start wizard and set a password, you can use that password to log in to the Azure console. ### Important You cannot change the SSH key from the Azure portal after the virtual machine is created. You must use the virtual appliance Web UI or CLI to change it. ###### Inbound port rules - Select **Allow selected ports** for **Public inbound ports**. - Select **HTTPS (443)** and **SSH (22)** for **Select inbound ports**. ### Networking - Make sure the correct **Virtual network** and **Subnet** are selected. - Accept the default **Public IP**, unless you plan to deploy the virtual machine in a VPN or behind a NAT device. - Click **Advanced** for **NIC network security group**. - Select the correct security group for **Configure network security group**. - *Optional for virtual machines with a rated bandwidth of 500 Mbps or less*: Set **Accelerated networking** to **Off**. Accelerated networking is required for virtual machines with a rated bandwidth of at least 1 Gbps and must be enabled using the Azure CLI as described in Azure Requirements on page 1. ### Tags - Define name and value pairs for the tags to apply to the virtual machine. ### Review + create - Click **Create** after the validation passes and you confirm the information on the page. :