Customize the syslog forwarder message

Prev Next

Before you begin

You must have saved the syslog server details successfully in the Syslog page.

Task

  1. To access the Syslog page from the Manager tab, do the following.
    1. Click the Manager tab.
    2. From the Domain drop-down list, select the domain you want to work in.
    3. Select Setup → Notification → IPS Quarantine Access Events.
      Option Definition
      Enable Syslog Logging? Select Yes to enable syslog and No to disable syslog.
      Applicable Admin Domains Current — Refers the admin domain currently selected. This is enabled by default.

      Children — Refers the child admin domains of the current domain.

      Target Syslog Server Name or IP Address The IP address or name of the syslog server which becomes the destination of the alert notifications sent by all devices.

      Note

      The length of server name has been increased to support up to 255 characters from 40 characters.

      Target Syslog Server UDP Port Port on the target syslog server that is authorized to receive syslog messages.

      The default protocol for syslog forwarding from Sensors is UDP. Therefore, this port must not be altered.

      Syslog Facility Standard syslog prioritization value. The choices are as follows:
      • Security/authorization (code 4)
      • Security/authorization (code 10)
      • Log audit (note 1)
      • Log alert (note 1)
      • Clock daemon (note 2)
      • Local user 0 (local0)
      • Local user 1 (local1)
      • Local user 2 (local2)
      • Local user 3 (local3)
      • Local user 4 (local4)
      • Local user 5 (local5)
      • Local user 6 (local6)
      • Local user 7 (local7)
      Syslog Priority You can map each severity (Informational, Low, Medium, or High) to one of these standard syslog severities:
      • Emergency – System is unusable
      • Alert – Action must be taken immediately
      • Critical – Critical conditions
      • Error – Error conditions
      • Warning – Warning conditions
      • Notice – Normal but significant condition
      • Informational – Informational messages
      • Debug – Debug-level messages
      Message Body System default — The default message is a quick summary of an event.

      Customized — Personalized message of an event.

  2. Click Test Connection in the Syslog page.
  3. Click Edit in the Message Body field in the Syslog page.
    The Customize Syslog Forwarder Message page displays.
  4. Customize the format for the syslog forwarder message.
    Option Definition
    Message Form the message by typing in the required text and by clicking on the parameters provided below this field.

    Important

    For Syslog information to appear correctly, ensure that you use the dollar-sign ($) delimiter immediately before and after each element. Example: $SENSOR_NAME$

    Save Saves the message you created. Displays the Syslog page when you click.
    Cancel Cancels the changes you made to the message.
    Reset to System Default After you customize the syslog message, the Reset to System Default button appears in the Customize Syslog Forwarder Message page. Click this button to revert to the system default message.
  5. Click Save in the Syslog page.