--- title: "Customize the syslog forwarder message" slug: "customize-the-syslog-forwarder-message-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:13Z published: 2026-11-19T12:27:13Z canonical: "docs.trellix.com/customize-the-syslog-forwarder-message-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Customize the syslog forwarder message **Prerequisite:** You must have saved the syslog server details successfully in the **Syslog** page. **Steps:** 1. To access the **Syslog** page from the **Manager** tab, do the following. 1. Click the **Manager** tab. 2. From the **Domain** drop-down list, select the domain you want to work in. 3. Select **Setup** → **Notification** → **Firewall Access Events**. | Option | Definition | | --- | --- | | **Enable Syslog Notification** | Select **Yes** to enable syslog and **No** to disable syslog. | | **Admin Domains** | **Current** — Refers the admin domain currently selected. This is enabled by default. **Children** — Refers the child admin domains of the current domain. | | **Server Name or IP Address** | Enter the syslog server name or its IP (IPv4 or IPv6) address. If you specify the syslog server name: - The Manager uses the DNS servers configured in its TCP/IP properties. - If you choose the Sensor to forward the logs to a syslog, then the Sensor uses the DNS servers that you configured in the **Name Resolution** page for the Sensor. > [!NOTE] > Note > > The length of server name has been increased to support up to 255 characters from 40 characters. | | **Port** | Enter the communication port number on the target server which is authorized to receive syslog messages. The standard port for syslog, which is 514, is pre-filled in the field. If you are using a non-standard port, then replace 514 with that number. | | **Facility** | Standard syslog prioritization value. The choices are as follows: - **Security/authorization (code 4)** - **Security/authorization (code 10)** - **Log audit (note 1)** - **Log alert (note 1)** - **Clock daemon (note 2)** - **Local user 0 (local0)** - **Local user 1 (local1)** - **Local user 2 (local2)** - **Local user 3 (local3)** - **Local user 4 (local4)** - **Local user 5 (local5)** - **Local user 6 (local6)** - **Local user 7 (local7)** | | **Priority** | You can map each severity (Informational, Low, Medium, or High) to one of these standard syslog severities: - **Emergency** – System is unusable - **Alert** – Action must be taken immediately - **Critical** – Critical conditions - **Error** – Error conditions - **Warning** – Warning conditions - **Notice** – Normal but significant condition - **Informational** – Informational messages - **Debug** – Debug-level messages | | **Message Body** | **System default** — The default message is a quick summary of an event. **Customized** — Personalized message of an event. > [!WARNING] > Important > > Till 11.1 Update 4 release, all Syslog notifications generated from the Manager UI were prefixed with the timestamp format *MMM DD HH:MM:SS*. From the 11.1 Update 5 release onwards, along with this timestamp, additional timestamp with format *[MMM DD, YYYY HH:MM:SS]* is appended to each Syslog notification from the Manager for auditing purposes. This timestamp update is independent of the syslog variables (default or customized) used to configure syslog notifications. > > As a user, you need to update the Syslog parsing logic in the third-party Syslog application(s) in use to avoid any timestamp conflicts in the Syslog notifications. | 2. Click **Test Connection** in the page. 3. Click **Edit** in the **Message Body** field in the page. The **Customize Syslog Forwarder Message** page displays. 4. Customize the format for the syslog forwarder message. | Option | Definition | | --- | --- | | **Message** | Form the message by typing in the required text and by clicking on the parameters provided below this field. > [!WARNING] > Important > > For Syslog information to appear correctly, ensure that you use the dollar-sign ($) delimiter immediately before and after each element. Example: $SENSOR_NAME$ | | **Save** | Saves the message you created. Displays the **Firewall Access Events** page when you click. | | **Cancel** | Cancels the changes you made to the message. | | **Reset to System Default** | After you customize the syslog message, the **Reset to System Default** button appears in the **Customize Syslog Forwarder Message** page. Click this button to revert to the system default message. | 5. Click **Save**.