--- title: "Customizing login banners and messages using the CLI" slug: "customizing-login-banners-and-messages-using-the-cli-1" updated: 2026-09-30T16:29:22Z published: 2026-09-30T16:29:22Z canonical: "docs.trellix.com/customizing-login-banners-and-messages-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Customizing login banners and messages using the CLI Use the CLI commands in this topic to configure the messages users see when they log in to the appliance. - The *login* message is shown after the username is entered. - The *local login message* is shown in the CLI login after the username is entered. - The *remote login message* is shown in the SSH login page. - The *message of the day* is shown after the password is entered and the user is authenticated. ### Note Messages can be longer than one line. To add a new line, type **>**. Each message can contain up to 2000 characters. Prerequisites - Operator or Admin access To customize the messages: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Display the current banner text: ```plaintext hostname (config) # show banner ``` 3. Perform the following tasks as needed. - To configure the same message for the *local login message* (that appears in the CLI login) and the *remote login message* (that appears in the Web UI login page and SSH login page), use the following command: ```plaintext hostname (config) # banner login "" ``` ### Important The *login message* you configure using the `banner login "<text>"` command also overwrites the *remote message* that is displayed on the Web UI login page and SSH login page. Use the [Customizing login messages using the web UI](/network-and-platform/docs/customizing-login-banners-and-messages-using-the-web-ui-1) to specify a unique Web UI and SSH login message. - To change the local login message only, use the following command: ```plaintext hostname (config) # banner login-local "" ``` - To change the remote login message only, use the following command: ```plaintext hostname (config) # banner login-remote "" ``` - To change the message of the day, use the following command: ```plaintext hostname (config) # banner motd "" ``` - To clear the local login message, the remote login message, or both: ```plaintext hostname (config) # banner login "" hostname (config) # banner login-local "" hostname (config) # banner login-remote "" ``` - To clear the message of the day: ```plaintext hostname (config) # banner motd "" ``` - To restore the default messages: ```plaintext hostname (config) # no banner login hostname (config) # no banner motd ``` 4. Save your changes. ```plaintext hostname (config) # write memory ``` ### Examples The following example changes the message of the day. ```plaintext hostname (config) # banner motd “There are no maintenance activities scheduled for this week.” ``` The following example changes the local and remote login messages: ```plaintext hostname (config) # banner login "This FireEye appliance is the property of Acme, Inc. > >Unauthorized access is prohibited and is punishable by law." ``` The following example shows the current messages. ```plaintext hostname # show banner Banners:     Message of the Day (MOTD): There are no maintenance activities scheduled for this week. ``` ```plaintext     Login: This FireEye appliance is the property of Acme, Inc. Unauthorized access is prohibited and is punishable by law. ``` The following example shows the default messages: ```plaintext hostname # show banner Banners:    Message of the Day (MOTD): FireEye Command Line Interface ``` ```plaintext    Local login: This system is for the use of authorized users only. > >Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel. ``` ```plaintext    Network login: This system is for the use of authorized users only. > >Individuals using this computer system without authority, or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by system personnel. ``` :