--- title: "datapathstat" slug: "datapathstat-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/datapathstat-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # datapathstat This command shows datapath statistics and details for all parameters. You can enter a single parameter to fetch the details. **Syntax:** `datapath core <core_number|all> parameter <param|all>` | Parameter | Description | | --- | --- | | **core_number** | can be a value between 0 - 31 | | **param**: The possible values for the parameter option are listed below. | | | datapath-cache-errors | datapath cache errors | | dp-rx-fcs-error-cnt | dp recv fcs error count | | dp-tx-fcs-error-cnt | dp sent fcs error count | | fifo-dumm | fifo dumm | | fifo-inuse-or-double-rx-free-errors | fifo in use or double recd free errors | | fifo-inuse-or-double-tx-free-errors | fifo in use or double sent free errors | | free-fifo | free fifo | | free-tx-buf | free sent buffer | | get-rx-buf-failed | get recd buffer failed | | get-tx-buf | get sent buffer | | get-tx-buf-failed | get sent buffer failed | | ip-checksum-err-pkt-count | ip checksum err pkt count | | rx-bad | bad recd | | rx-buf-added | recd buffer added | | rx-bytes | bytes recd | | rx-cnt | recd count | | rx-descriptors-avail | recd descriptors avail | | rx-empty | empty recd | | rx-frames | frames recd | | rx-high-watermark-cnt | recd high watermark count | | rx-low-watermark-cnt | recd low watermark count | | rx-retry | retry recd | | rx-too-big | too big recd | | sensor-load | display Sensor load | | tcp-checksum-err-pkt-count | tcp checksum err pkt count | | tx-bytes | bytes sent | | tx-cnt | sent count | | tx-done | sent done | | tx-frames | frames sent | | tx-full-cnt | sent full count | | tx-pending-cnt | sent pending count | | udp-checksum-err-pkt-count | udp checksum err pkt count | **Sample Output:** `IntruDbg#> datapath core all parameter all` `core 1` `Tx frames: 0` `Tx bytes: 0` `Rx frames: 0` `Rx bytes: 0` `Rx bad: 0` `Rx empty: 0` `Rx retry: 0` `Rx too big: 0` `free fifo: 0` `IP checksum err pkt count: 0` `TCP checksum err pkt count: 0` `UDP checksum err pkt count: 0` `rx descriptors avail: 0` `rx low watermark cnt: 0` `rx high watermark cnt: 0` `free tx buf: 0` `tx done: 0` `get tx buf: 0` `get tx buf failed: 0` `get rx buf failed: 0` `tx dcnt: 0` `rx dcnt: 0` `rx buf added: 0` `datapath cache errors: 0` `fifo dumm: 0` `Tx full cnt: 0` `Tx pending cnt: 0` `Fifo inuse/double Tx free errors: 0` `Fifo inuse/double Rx free errors: 0` `dp-rx-fcs-error-cnt: 0` `dp-tx-fcs-error-cnt: 0` `sensor-load: 0` **Applicable to:** NS-series Sensors