--- title: "datapathstat intfport" slug: "datapathstat-intfport-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/datapathstat-intfport-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # datapathstat intfport This command displays the datapath statistics and the details of all the parameters for an interface port. You can also enter a single parameter to fetch the details. **Syntax:** `datapathstat intfport <id> core <core_number|all> parameter <param|all>` | Parameter | Description | | --- | --- | | **id** | Valid interface port ID | | **core_number** | Valid core number that is a numeric value in a range specific to the Sensor model | | **param**: The possible values for the parameter option are listed below. | | - tx-frames | Frames sent | | - tx-bytes | Bytes sent | | | Frames received | | - rx-frames - rx-bytes | Bytes received | | - ip-checksum-err-pkt-count | Total number of checksum error packets in IP traffic | | - tcp-checksum-err-pkt-count | Total number of checksum error packets in TCP traffic | | - udp-checksum-err-pkt-count | Total number of checksum error packets in UDP traffic | | - rx-count | Data path packet count received | **Sample Output:** `IntruDbg#> datapathstat intfport g3/8 core 1 parameter all` | | `Datapath:` | `DP 0` | `DP 1` | `DP 2` | `DP 3` | `DP 4` | `DP 5` | | --- | --- | --- | --- | --- | --- | --- | --- | | `core 1` | `Tx frames:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `Tx bytes` | `0` | `0` | `0` | `0` | `0` | `0` | | | `Rx frames:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `Rx bytes:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `IP checksum err pkt count:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `TCP checksum err pkt count:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `UDP checksum err pkt count:` | `0` | `0` | `0` | `0` | `0` | `0` | | | `rx count:` | `0` | `0` | `0` | `0` | `0` | `0` | **Applicable to:** NS-series and Virtual IPS Sensors