--- title: "Default single-interface LAN configuration" slug: "default-single-interface-lan-configuration-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T10:34:31Z published: 2026-10-01T10:38:17Z canonical: "docs.trellix.com/default-single-interface-lan-configuration-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Default single-interface LAN configuration This is the simplest configuration because it uses default settings and the management (ether1) interface, which is already defined. IP routing is not needed, because the two nodes are in the same subnet. - [Configuring the default single-interface LAN option using the wizard](/network-and-platform/docs/configuring-the-default-single-interface-lan-option-using-the-wizard-1) - [Configuring the default single-interface LAN option using the CLI](/network-and-platform/docs/configuring-the-default-single-interface-lan-option-using-the-cli-1) ### Prerequisites - Admin access - Requirements listed in [Basic requirements](/network-and-platform/docs/system-requirements-3#basic_requirements) - Cable or switch requirement listed in [LAN deployment requirements](/network-and-platform/docs/system-requirements-3#lan_deployment_requirements) :