--- title: "Defining access group rules for YARA settings using the CLI" slug: "defining-access-group-rules-for-yara-settings-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/defining-access-group-rules-for-yara-settings-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Defining access group rules for YARA settings using the CLI Use the commands in this topic to authorize an access group to modify YARA rules. To define the access group rule: 1. Log in to the Network Security CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Define the rule: ``` hostname (config) # aaa authorization access-groups group rules rule append tail match-yara-rules-access] ``` where: - `access group name` is the name of the access group. 4. Verify your changes: ``` hostname (config) # show aaa authorization access-groups group ``` 5. Save your changes: ``` hostname (config) # write memory ``` ### Example The following example enables the access group "special-analysts" to modify and delete YARA rules. ``` hostname (config) # aaa authorization access-groups group special-analysts  rules rule append tail match-yara-rules-access ``` ``` hostname (config) # show aaa authorization access-groups group special-analysts AAA Authorization Access-groups Rules : Enabled ------------------------------------------------ # Group: special-analysts                   ------------------------------------------------ # Rule         Statements       ------------------------------------------------ #1 Match YARA rules access ``` :