--- title: "Defining filters for table attributes on a custom report section using the Web UI" slug: "defining-filters-for-table-attributes-on-custom-report-section-2" updated: 2026-08-25T21:18:18Z published: 2026-08-25T21:18:18Z canonical: "docs.trellix.com/defining-filters-for-table-attributes-on-custom-report-section-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Defining filters for table attributes on a custom report section using the Web UI Follow these steps to define filters for table attributes on a custom report section for managed appliances using the Central Management System appliance Web UI. You can use filter options to define the match criteria for attributes that are the table columns displayed in each section of the custom report. ### Note You can define filters for table attributes on a custom report section only using the Web UI. ### Note You cannot define filters for the following table types: - Appliance Status Report - Sensor Status Report - Email Counters Hourly Stats - URL Counters in Email Hourly Stats ### Note If you want to completely delete a section of a custom report, click **Delete** in the **Configure Section** page. Prerequisites - Access to the Web UI of the Central Management System appliance as Admin, Analyst or Monitor - You have defined the settings for the custom report using the Central Management System Web UI. For details about how to define the settings for the custom report, see [Defining custom report settings using the Web UI](/docs/defining-settings-in-a-custom-report-using-the-web-ui-1) . - You have added one or more table sections to a custom report using the Central Management System Web UI. For details about how to add a table to a section of a custom reports, see [Adding tables to a custom report using the Web UI](/docs/adding-tables-to-a-custom-report-using-the-web-ui-1) . To define filters for table attributes on a custom report section: 1. In the **Settings** page, click **Next**. The filter selection area is displayed. ![CM_CustomReports_FilterTableSection_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3401ba9b-f6f8-a319-ec6d-524e71005806(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A34%3A38Z&se=2026-11-20T10%3A34%3A38Z&sr=c&sp=r&sig=CfcnLSuo4qNWQdBLADNzd3mtpZf5MEZqOWAUWwD43ec%3D) 2. In the **Add Filters** area: - Choose an attribute. The available options depend on the table option you selected. - Choose the operation (for example, **In**, **Not In**, **Like**, or **=**) to match the particular attribute. The available operations depend on the attribute you selected. - Enter any value you want to associate with the attribute. - Choose **And** or **Or** as the logical operation to associate with the attribute. - Click **Add Filter**. You can add multiple filters at one time. - To delete a filter, click the Delete (trash can) icon. 3. Repeat the previous step for each filter you want to define. 4. In the **Additional Filters** area: - Select either **Not Acknowledged**, **Acknowledged**, or **Both**. The default value is **Not Acknowledged**. - (Optional) In the **Limit** field, enter the number of rows that you want displayed in the output. - Choose **All Sensors** or the applicable sensor or sensor-enabled integrated appliance that is connected to this Central Management System appliance. ### Note The options in the **Additional Filters** area are based on the table option you selected. 5. (Optional) To preview the table settings, select the **Preview** checkbox. The table columns that you selected are displayed. If you need to refresh the content, click the refresh icon (![ALL_Refresh_icon.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-995fe124-2228-f320-3a0d-6ce77c089f94(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A34%3A38Z&se=2026-11-20T10%3A34%3A38Z&sr=c&sp=r&sig=CfcnLSuo4qNWQdBLADNzd3mtpZf5MEZqOWAUWwD43ec%3D)). This icon also allows you to preview the new settings while the **Preview** checkbox is selected. 6. Click **Save**. If there is a problem with the filter criteria that you defined, the following message appears. Correct the filter definition. ![CM_CustomReports_FilterErrorMessage_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cac3cce6-e246-fbe8-ec7b-962a2c72ddf5(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A34%3A38Z&se=2026-11-20T10%3A34%3A38Z&sr=c&sp=r&sig=CfcnLSuo4qNWQdBLADNzd3mtpZf5MEZqOWAUWwD43ec%3D) :