This command clears the Manager-Sensor trust data (the certificate and the shared key value). Every time you delete a Sensor from the Manager, you must issue this command on the Sensor to clear the established trust relationship before reconfiguring the Sensor.
This command has no parameters.
Syntax:
deinstall
On executing the command, the following messages are displayed:
deinstall the sensor and remove the trust with the manager ?
Please enter Y to confirm: Y
Note
If you enter Y, the Manager/Sensor trust is removed. By pressing N, the Manager/Sensor trust remains intact and you come out of the deinstall prompt.
Pressing Y displays the following message:
deinstall in progress ...
this will take a couple of seconds, please check status on CLI
Applicable to:
NS-series Sensors