--- title: "Deleting a Network Security HA pair using the CLI" slug: "deleting-a-network-security-ha-pair-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:32:10Z published: 2026-09-12T20:32:10Z canonical: "docs.trellix.com/deleting-a-network-security-ha-pair-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deleting a Network Security HA pair using the CLI Use the commands in this section to delete a Network Security HA pair from the Central Management System appliance. To delete a Network Security HA pair: 1. Log in to the Central Management System CLI. 2. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal hostname (config) # ``` 3. Delete the pair: ``` hostname (config) # no cmc ha nx ``` 4. Verify your change: ``` hostname (config) # show cmc ha nx ``` 5. Save your change: ``` hostname (config) # write memory ``` ###### Example The following example deletes the Acme_NXHA pair. ``` hostname (config) # no cmc ha nx Acme_NXHA hostname (config) # show cmc ha nx No NX-HA pairs configured. ``` :