--- title: "Deleting a node from the Central Management appliance" slug: "deleting-a-node-from-the-central-management-appliance" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/deleting-a-node-from-the-central-management-appliance" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deleting a node from the Central Management appliance You must remove a broker node or compute node (IVX appliance) from an IVX cluster before you can delete it from the Central Management appliance. **Prerequisites** - Operator or Admin access to the Central Management appliance - Node is an available node (that is, it is not currently part of an IVX cluster). ##### Deleting a node from the Central Management appliance using the Web UI Use the **Appliances** > **Nodes** page to delete a node from the Central Management appliance. > [!WARNING] > Important > > The node must be removed from the cluster before it can be removed from the Central Management appliance. ###### To delete a node: 1. Log in to the Central Management Web UI. 2. Select **Appliances** > **Nodes**. 3. Click the **Actions** menu, and then select **Delete**. 4. When prompted, click **DELETE** to confirm that you want to delete the node. ##### Deleting a node from the Central Management appliance using the CLI Use the commands in this section to delete a node (Virtual Execution appliance) from the Central Management appliance. ###### To delete a node from the Central Management appliance: 1. Log in to the Central Management CLI. 2. Enable the CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Delete the node: ``` cm-hostname (config) # no cmc appliance ``` 4. Verify your change: ``` cm-hostname (config) # show cmc appliances brief ``` 5. Save your change: ``` cm-hostname (config) # write memory ``` ###### Example The following example deletes the vx-3 node from the Central Management appliance. ``` cm-1 (config) # no cmc appliance vx-3 ```