--- title: "Deleting generated reports using the CLI" slug: "deleting-generated-reports-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/deleting-generated-reports-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deleting generated reports using the CLI Follow these steps to delete generated reports using the CLI. A generated SmartVision alerts report can be deleted using the Web UI or the CLI. ### Prerequisites - Admin access to the SmartVision appliance. To delete generated reports from the appliance: 1. Log in to the appliance CLI and go to configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Use the appliance Web UI to determine the name of the report file to delete from the `/data/reports` directory. See [Deleting generated reports using the Web UI](/docs/deleting-generated-reports-using-the-web-ui). 3. Delete a generated report by using the following command, where `<fileName>` is the report file name to delete from the `/data/reports` directory: ``` report delete ``` ### Note Wild card matching is not supported. This example deletes an executive summary report: ``` hostname (config) # report delete smart_vision_IE-NX900-2_20180522_185359294034326000.pdf ``` 4. Use the appliance Web UI to verify that the report is no longer listed. ``` hostname (config) # show report schedule ``` :