--- title: "Deleting user accounts using the appliance CLI" slug: "deleting-user-accounts-using-the-appliance-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/deleting-user-accounts-using-the-appliance-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deleting user accounts using the appliance CLI On a local system, you have the ability to delete user accounts using the device's CLI. The instructions below will provide the steps necessary to delete the user account. ### Note For a managed appliance, you can perform this procedure on the Central Management System appliance as well as the local appliance. The procedure remains the same. However, you will need to take the additional step to locate the appliance on the Central Management System CLI. For instructions on locating an appliance on the Central Management System CLI, see the *Trellix Central Management System Administration Guide*. ### Prerequisites - Admin access To delete an existing account: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To delete a specified user, use the following command: ``` no username ``` The following example deletes the user account for nx‑3_operator: ``` hostname (config) # no username nx-3_operator ``` 3. Save your changes: ``` hostname (config) # write memory ``` :