--- title: "Disabling access groups for alerts using the CLI" slug: "disabling-access-groups-for-alerts-using-the-cli-2" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/disabling-access-groups-for-alerts-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling access groups for alerts using the CLI Use the commands in this topic to disable the use of access groups for alerts. To disable access groups for alerts: 1. Log in to the Central Management System appliance. 2. Go to CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Disable the access group for alerts feature: ``` cm-hostname (config) # no aaa authorization access-groups area alerts enable ``` 4. Verify your change: ``` cm-hostname (config) # show aaa authorization access-groups ``` 5. Save your change: ``` cm-hostname (config) # write memory ``` ### Example The following example disables access groups for alerts on the cm-05 appliance. The nx-alerts access group is not removed, but has no effect unless access groups for alerts are re-enabled. ``` cm-05 (config) # no aaa authorization access-groups area alerts enable ``` ``` cm-05 (config) # show aaa authorization access-groups AAA Access-groups enabled for : none ---------------------------------------------- # Group: nx-alerts   ---------------------------------------------- # Rule           Statements ---------------------------------------------- #1               Not Match Alert Severity: minor ... ``` :