--- title: "Disabling access groups for alerts using the CLI" slug: "disabling-access-groups-for-alerts-using-the-cli-3" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/disabling-access-groups-for-alerts-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling access groups for alerts using the CLI Use the commands in this topic to disable the use of access groups for YARA rules access. To disable access groups for YARA rules: 1. Log in to the Central Management System appliance. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Disable the access group for YARA rules feature: ``` hostname (config) # no aaa authorization access-groups yara_rules alerts enable ``` 4. Verify your change: ``` hostname (config) # show aaa authorization access-groups ``` 5. Save your change: ``` hostname (config) # write memory ``` ### Example The following example disables access groups for alerts on the Network Security appliance. The nx-alerts access group is not removed, but has no effect unless access groups for alerts are re-enabled. ``` hostname (config) # no aaa authorization access-groups area yara_rules enable ``` ``` hostname (config) # show aaa authorization access-groups AAA Access-groups enabled for : none No Access groups configured. ``` :