--- title: "Disabling cluster utilization statistics" slug: "disabling-cluster-utilization-statistics" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/disabling-cluster-utilization-statistics" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling cluster utilization statistics You can stop the collection and display of IVX cluster utilization statistics. > [!NOTE] > Note > > The **Cluster Utilization** panel on the Central Management Dashboard is removed when you disable cluster utilization statistics. ##### To disable cluster utilization statistics: 1. Log in to the Central Management CLI. 2. Enable the CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Disable the feature: ``` cm-hostname (config) # no cmc mvx status cluster-sizing enable ``` 4. Verify your change: ``` cm-hostname (config) # show cmc mvx status cluster-sizing config ``` 5. Save your change: ``` cm-hostname (config) # write memory ``` > [!NOTE] > Note > > To re-enable cluster sizing statistics, use the cmc mvx status cluster- sizing enable command. **Example** The following example stops the collection and display of IVX cluster utilization statistics. ``` cm-1 (config) # no cmc mvx status cluster-sizing enable MVX Cluster Sizing Configurations: Enabled                            : no Utilization Warning Threshold      : 80% Utilization Critical Threshold     : 95% ```