--- title: "Disabling dropper detection using the CLI" slug: "disabling-dropper-detection-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/disabling-dropper-detection-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling dropper detection using the CLI This procedure describes how to use CLI commands to disable the dropper detection component of static analysis. Dropper detection is enabled by default. You can disable and re-enable dropper detection by using CLI commands only. **Prerequisites** - Operator or Admin access **To disable the dropper detection component of static analysis:** 1. Go to CLI configuration mode. ``` vx-hostname > enable vx-hostname # configure terminal ``` 2. Disable dropper detection. ``` vx-hostname (config) # no static-analysis dropper enable ``` 3. Verify that dropper detection is not enabled. ``` vx-hostname (config) # show static-analysis config Static Analysis enabled                : yes  AV-suite enabled                     : yes  AV-suite version                     : 6  SA on AV-suite whitelist enabled     : no  AV-check enabled                     : yes Dropper enabled                      : no  YARA enabled                         : yes Embedded object extraction enabled     : no Embedded URL extraction enabled        : yes Max URLs from files to be analyzed     : 5 Static info policy                     : Disable Yara Configuration  Yara policy                          : both  Yara customer match limit            : 5  ........ ``` 4. Save your changes. ``` vx-hostname (config) # write memory ```