--- title: "Disabling Helix Enterprise mode" slug: "disabling-helix-enterprise-mode" tags: ["Helix Enterprise", "Integration", "Sec Ops and Analytics"] updated: 2026-09-05T14:08:38Z published: 2026-09-05T14:08:38Z canonical: "docs.trellix.com/disabling-helix-enterprise-mode" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling Helix Enterprise mode Use the commands in this topic to disable Helix Enterprise mode on an appliance. To disable Helix Enterprise mode: 1. Log into the Helix Enterprise appliance. 2. Go CLI configuration mode: ``` hostname > enable hostname # configure terminal                   ``` 3. Disable Helix Enterprise mode: ``` hostname (config) # no helix mode                 ``` 4. Verify your change: ``` hostname (config) # show helix                   ``` 5. Save your change: ``` hostname (config) # write memory                   ``` ### Example The following example disables Helix Enterprise mode on the cm-02 appliance. ``` cm-02 (config) # no helix mode  Helix Configurations:    Enabled                : no    FQDN                   :    Bootstrap Certificate  : ```