--- title: "Disabling malware intrinsic analysis using the CLI" slug: "disabling-malware-intrinsic-analysis-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:26Z published: 2026-08-24T20:40:26Z canonical: "docs.trellix.com/disabling-malware-intrinsic-analysis-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling malware intrinsic analysis using the CLI This procedure describes how to use CLI commands to disable the malware intrinsic analysis component of static analysis. Malware intrinsic analysis is enabled by default. You can disable and re-enable intrinsic analysis by using CLI commands only. When intrinsic analysis is re-enabled, no other configuration is required. **Prerequisites** - Operator or Admin access **To disable the intrinsic analysis component of static analysis:** 1. Go to CLI configuration mode. ``` vx-hostname > enable vx-hostname # configure terminal ``` 2. Disable malware intrinsic analysis. ``` vx-hostname (config) # no static-analysis malware-intrinsic-analysis enable ``` 3. Verify that malware intrinsic analysis is not enabled. ``` vx-hostname (config) # show static-analysis config  Static Analysis enabled                : yes    AV-suite enabled                     : yes    AV-check enabled                     : yes    Dropper enabled                      : no    YARA enabled                         : yes    Malware Intrinsic Analysis enabled   : no (DTI)  Embedded object extraction enabled     : no  Static info policy                     : Disable  Yara Configuration    Yara policy                          : both    Yara customer match limit            : 5    Yara customer default weight         : 0  Malware Whitelist Past Hours           : 24  Malware Blacklist Past Hours           : 4  Analysis reset duplicate since         : 2016/07/07 22:46:16  Mobile Threat Prevention               : yes ``` 4. Save your changes. ``` vx-hostname (config) # write memory ```