--- title: "Disabling SmartVision using the CLI" slug: "disabling-smartvision-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:09Z published: 2026-09-02T17:27:09Z canonical: "docs.trellix.com/disabling-smartvision-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling SmartVision using the CLI Follow these steps to disable SmartVision. ### Prerequisites - Admin access to the SmartVision appliance. To disable SmartVision : 1. Log in to the appliance CLI and go to configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To disable SmartVision, use the no form of the configuration command: ``` hostname (config) # no smartvision enable Disabling SmartVision. ``` 3. Verify your configuration change. ``` hostname (config) # show smartvision status SmartVision State        Detection                      : no        .        .        . ``` ``` hostname (config) # show smartvision config SmartVision Config        Detection Enabled             : no        .        .        . ``` 4. Save your changes. ``` hostname (config) #  write memory ``` :