--- title: "Disabling the static analysis feature using the CLI" slug: "disabling-the-static-analysis-feature-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-25T13:20:18Z published: 2026-08-25T13:20:18Z canonical: "docs.trellix.com/disabling-the-static-analysis-feature-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling the static analysis feature using the CLI This procedure describes how to use CLI commands to disable static analysis. The feature is enabled by default. You can disable and re-enable static analysis by using CLI commands only. When static analysis is disabled, the Intelligent Virtual Execution - Server appliance does not use any of the static analysis components listed in [Static analysis feature](/network-and-platform/docs/static-analysis-feature) **Prerequisites** - Operator or Admin access. - Static analysis is enabled on the compute node. Check the "Static Analysis enabled" field in the output of the `show static-analysis config` command. **To disable static analysis:** 1. Go to CLI configuration mode. `vx-hostname > enable vx-hostname # configure terminal` 2. Disable static analysis on the Intelligent Virtual Execution - Server appliance. `vx-hostname (config) # no static-analysis enable` 3. Verify the status that static analysis is not enabled on the appliance. ```plaintext vx-hostname (config) # show static-analysis configStatic Analysis enabled               : no  AV-suite enabled                     : yes  AV-suite version                     : 6  SA on AV-suite whitelist enabled     : no  AV-check enabled                     : yes  Dropper enabled                      : yes  YARA enabled                         : yes   Embedded object extraction enabled     : no Embedded URL extraction enabled        : yes Max URLs from files to be analyzed     : 5 Static info policy                     : Disable ``` ```plaintext Yara Configuration  Yara policy                          : both  Yara customer match limit            : 5 ........ ``` 4. Save your changes. `vx-hostname (config) # write memory`