--- title: "Disabling Trellix Helix mode" slug: "disabling-trellix-helix-mode" tags: ["Integration", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:11Z published: 2026-09-02T19:14:11Z canonical: "docs.trellix.com/disabling-trellix-helix-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Disabling Trellix Helix mode Use the commands in this topic to disable Trellix Helix mode on an appliance. **To disable Trellix Helix mode:** 1. Log into the Trellix Helix appliance. 2. Go CLI configuration mode: ``` hostname > enable hostname # configure terminal                   ``` 3. Disable Trellix Helix mode: ``` hostname (config) # no helix mode                 ``` 4. Verify your change: ``` hostname (config) # show helix                   ``` 5. Save your change: ``` hostname (config) # write memory                   ``` ### Example The following example disables Trellix Helix mode on the cm-02 appliance. ``` cm-02 (config) # no helix mode  Helix Configurations:    Enabled                : no    FQDN                   :    Bootstrap Certificate  : ```