--- title: "Displaying alerts for a specific host using the CLI" slug: "displaying-alerts-for-a-specific-host-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/displaying-alerts-for-a-specific-host-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Displaying alerts for a specific host using the CLI Use the CLI `show alerts hosts <ip-address>` command to display the list of all alerts for a specified host. ### Prerequisites - Administrator or Operator access to the Network Security appliance **To show the list of all triggered alerts for a specified host:** 1. Go to the CLI enable mode. ``` hostname > enable ``` 2. Enter the command `show alerts hosts <ip-address>`: ``` hostname # show alerts hosts ``` Example The following example displays the list of all alerts triggered during the last 24 hours, for the host 10.1.131.205. ``` hostname # show alerts hosts 10.1.131.205 (Showing last 24 hours) Type ID   SrcIP       Severity Time                Name ----------------------------------------------------------------------------- CB 76776 10.1.131.205 critical 2019-01-24 20:23:26 Trojan.NaviPromo CB 76775 10.1.131.205 critical 2019-01-24 20:23:24 Trojan.Pincav ... ```