--- title: "Displaying details about IPS policies applied to monitoring interfaces (CLI)" slug: "displaying-details-about-ips-policies-applied-to-monitoring-interfaces-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/displaying-details-about-ips-policies-applied-to-monitoring-interfaces-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Displaying details about IPS policies applied to monitoring interfaces (CLI) To display details about monitoring interfaces associated with IPS policies, use the `show ips interfaces` command in enable mode. For each active monitoring interface, the command output displays the name of the IPS policy applied and the number of active IPS rules. ##### Prerequisites - Log in to the Web UI of the IPS platform as Operator or Admin. ##### Procedure To stop applying policy-selected IPS rules to the traffic at a monitoring interface: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Display the appliance interfaces and the current application of IPS policies to monitoring interfaces. In the following example, the appliance has two monitoring interfaces and two default IPS policies are active on the interfaces. ``` hostname # show ips interfaces Interface : A Policy applied : Comprehensive Rule count : 6882 Interface : B Policy applied : myCustom1 Rule count : 1002 ``` :