--- title: "Displaying the attributes of an IPS policy (CLI)" slug: "displaying-the-attributes-of-an-ips-policy-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/displaying-the-attributes-of-an-ips-policy-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Displaying the attributes of an IPS policy (CLI) At the CLI of an IPS platform, you can display the attributes of a default or custom IPS policy by using the `show ips policies` command. The command output displays policy state attributes, rule selection attributes, rule exclusion attributes, and rule inclusion attributes. ##### Prerequisites - Log in to the CLI of the IPS appliance as Monitor, Analyst, Operator, or Admin. ##### Procedure To display the attributes of an IPS policy: 1. Enable the CLI enable mode. ``` hostname > enable ``` 2. Display the attributes of an IPS policy. The following example displays the attributes of the custom IPS policy named `myCustom1`. ``` hostname # show ips policies myCustom1 Policy attributes :        active : no        writable : yes        modified_date : 2014/09/25 10:24:48        version : 9 Match attributes of policy :        attack-target : client        min-severity : 5        max-severity : 10 Inclusion list for policy :        85301782 Exception list for policy :        8530001,8530050 Fingerprint of policy : 2014/09/25 10:24:48 | 287fd1bda05326809e195cccf5e9798c ``` :