--- title: "dnsprotect" slug: "dnsprotect-7" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/dnsprotect-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # dnsprotect This command performs the following tasks: - Adds a new DNS Spoof protection IP address - Deletes an existing DNS Spoof protection IP addresses (IPv4, IPv6, or both) from the Protected Server List (PSL) - Relists the DNS spoofing protection IP address This command does not perform when the IPv6 packets have a routing header. **Syntax:** Use the following syntax for adding or deleting a DNS spoof protection IP address: `dnsprotect <add/delete/> <ipv4/ipv6> <IP address>` While using the parameter, use the following syntax: `dnsprotect <resetlist> <ipv4/ipv6/all>` | Parameter | Description | | --- | --- | | add | Adds a new DNS spoofing protection IP address | | delete | Deletes an existing DNS spoofing protection IP address | | resetlist | Resets the list the DNS spoofing protection IP address | | ipv4 | Indicates that the IP address is for IPv4 packet | | ipv6 | Indicates that the IP address is for IPv6 packet | | all | Indicates that the resetlist of the existing DNS spoofing protection IP address is for both IPv4 and IPv6 | | IP address | This is a 32-bit IP address number indicated by four numbers separated by periods (X.X.X.X), where X indicates a number between 0-255. | **Example:** The following example shows the `dnsprotect` command used for adding the DNS spoof protection IP address for IPv4: `dnsprotect add ipv4 157.125.202.255.` The following example shows the `dnsprotect` command used for reset listing of DNS spoof protection IP address for all the IP addresses(IPv4 and IPv6): `dnsprotect resetlist all` **Applicable to:** NS-series Sensors