--- title: "dossampling" slug: "dossampling-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/dossampling-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # dossampling By default, sub-sampling is enabled due to which the packet count in DoS alerts shows lower than that of the actual attack, on UDP traffic. You can disable or enable sub-sampling using this command. **Syntax:** `dossampling <enable|disable> <inbound|outbound>` **Example:** `dossampling enable inbound` `dossampling enable outbound` `dossampling disable inbound` `dossampling disable outbound` **Applicable to:** NS-series Sensors