---
title: "dossampling"
slug: "dossampling"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:40Z
published: 2026-10-05T15:40:40Z
canonical: "docs.trellix.com/dossampling"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# dossampling
By default, sub-sampling is enabled due to which the packet count in DoS alerts shows lower than that of the actual attack, on UDP traffic. You can disable or enable sub-sampling using this command.
**Syntax:**
dossampling <enable|disable> <inbound|outbound>
**Example:**
dossampling enable inbound
dossampling enable outbound
dossampling disable inbound
dossampling disable outbound
**Applicable to:**
NS-series Sensors